Eastman™ Chlorinated Polyolefin 343-1 (100% Solids)

Application/Uses

- Adhesion promoter for paints - Automotive OEM - Coatings - Coatings for Automotive Plastics - Coatings for plastic - Truck/Bus/Commercial Vehicles

Product Description

Eastman™ Chlorinated Polyolefin 343-1 is supplied as a white powder and is soluble in both toluene and xylene. It is 18-23 wt. % chlorine. CP 343-1 has good resistance to high temperatures. Because of its limited solubility, solutions of CP 343-1 may become hazy, partially precipitate from solution or gel with exposure to low temperatures. Should any of the above conditions occur, warming the contents to approximately 38° 49° C, with mild agitation will generally return the product to its original condition. Care should be taken in handling or mixing nonpolar solvents such as xylene and toluene.

Typical Properties

Property	Typical Value, Units
Form	Powder
Specific Gravity@ 25°C/25°C	1.03
Flash PointTag Closed Cup	274°C (525°F)
Softening Point	80-95°C (176-203°F)
Chlorine	18-23 wt %
Color, Gardner	Light tan

Comments

Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.

Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.